|
FireOut
base ingredient Phosphorinated
Flame Retardant is combined with one or more
patent protected compounds providing FireOut
with significant characteristics such as
non-corrosive, Halon free, moisture resistant,
effective flame-retardant while being
completely environmentally safe and easy to
clean.
Please
see links located at the bottom of this page
for more information on FireOut content.
-
Main Ingredients are not listed and are patent
pending protected under US laws -
Base
Ingredients:
Synonyms:
APP;
Polyphosphoric acids, ammonium salts
CAS
No.: 68333-79-9
Molecular
Formula: (NH4PO3)n
Structural
Formula:
Phase
II:
Application*
Phase
I: intumescent flame-retardant component for
coating, wood, paper, plywood, cable, fiber,
plastic, rubber, resin, component of
fire-extinguishing dry-powder for fire of
forest, oil-well, and coal mine.
Phase
II: Due to its low solubility in water,
Phase II APP is particularly suitable as an
"acid donor" for intumescent
flame-retardant paints or coating, which is
applied in steel structures, wood/plastic
applied in building material, adhesives and
sealants, non-halogenated flexible and rigid
polyurethane foams, as well as
cellulose-contained paper and wood products
Specification*
Item
|
Phase
I |
Phase
II
|
Phase
II Microencapsulated by Melamine |
| P
content |
- |
31-33% |
28%
min. |
| N
content |
14~15% |
13-15% |
15.5%
min. |
| P2O5
Content |
69%
min. |
- |
- |
| water |
- |
0.25%
max |
1.0%
max. |
| Average
Polymerization Degree |
70 |
>1000 |
>1000 |
| PH
(1% water suspension/solution) |
5.5~6.5 |
5.5-7.5 |
6.5~7.5 |
| PH
(10% water Solution) |
5.2~6.2 |
- |
- |
| Water
Soluble Matter (25 deg. C, 10%
suspension) |
- |
0.5%
max |
0.05%
max. |
| Viscosity
in Water (25 deg. C, 10% suspension) |
- |
100mPa.S
max |
20mPa.S
max. |
| Density |
- |
1.9g/cm3 |
1.9g/cm3 |
| Bulk
density |
- |
~0.7g/cm3 |
~0.7g/cm3 |
| Decomposition
T |
- |
275
deg C. |
300
deg. C |
| Average
particle size |
325
mesh |
8~15
microns |
10~20
microns |
| Appearance |
white
powder |
white
powder |
white
powder |
Standard
Packing
25kgs
net /paper bag with PE lining bag;
1000kg/supper sacks
Risks
and Safety Info
Not regulated by UN, US DOT, EU
May cause slight skin irritation but not
irritating to the mucous membranes.
S 24/25 Avoid contact with skin and eyes
React with alkaline solutions to form ammonia
and can contribute to eutrophication of
stagnant waters.
Component
Cas
Number:
68333-79-9
EC
Number (EINECS):
269-789-9
Percentage:
100.0
NFPA
rating (scale 0-4)
Health =1 Fire =0 Reactivity =0
Physical
form:
crystals/powder
Major
health hazards:
No significant target effects reported.
OSHA
process safety (29CFR1910.119): Not regulated,
View PDF
Occupational
exposure limit:
ACGIH
TLV 10mg/m (inhalable) 8-hr TWA, 3 mg/m (respirable)
8-hr TWA
OSHA
PEL 15mg/m (total dust) 8-hr TWA, 5mg/m (respirable)
8-hr TWA
OSHA
and ACGIH have not established specifi
exposure limits for this material. Link
US
Department of labor: Link
US
DOT:
Not regulated for transportation
Canadian
TDG:
Not regulated for transportation
State
Regulations:
California Proposition 65: Not regulated, View
PDF
Underwriter
Laboratories Inc.
View
Link
Environmental
Health Criteria 192 View
Link
Federal
Register Environmental Documents View
Link
Additional
Description View
Link
Ingredient
is Ammonium Polyphosphates 68333-79-9,
application listing PP.
Link
Flame Retardant Types, FAB
|
